Rogers Whitbread 30 For Sale - £22,950
Vital Statistics of the Rogers Whitbread 30
Interested In This Boat?
This Rogers Whitbread 30 is for sale for £22,950
For further information on this boat, please click the button below, or telephone Simon Walworth on
+44 (0) 7855 787561
Short Description of the Rogers Whitbread 30
Whitbread 30 designed and built by Rogers, lying South Glamorgan, Wales.' May Contain Nuts' is a Simon Rogers designed, water ballasted Whitbread 30 (later Mount Gay 30), from 1996 and a sister ship to the famous 'Sticky Fingers'.
At 9.5 metres overall she is probably the smallest (and cheapest) boat which can be raced offshore up to, and including, the Fastnet Race. She was formerly called 'Brightwork' and was raced in several shorthanded series and RORC races by the previous owner. We have owned her since 2014 and competed locally and in RORC races including Fastnets in 2015, 2017 and 2019.
She has been continually uprated over the years by ourselves and the previous owner with recent conversions to a deck-mounted reeving bowsprit with a fully asymmetric offwind inventory and a new rig.
She is a fun, solid and safe offshore boat, with more than adequate accommodation for offshore racing. Currently set up for short-handed sailing, if you want to race SORC or RORC 2-handed, she’s competitive against the Sun Fast 3200’s and if you want one but and can’t afford it then this is the boat for you.
The hull is foam cored GRP, the underwater sections were gelshielded at some point in the past but this has become a bit patchy so we have sanded it and applied 2 coats of Interprotect epoxy. It is currently covered with Eelsnot foul release coating The topsides were vinyl wrapped in 2016 and the port side and transom were re-done in October 2018.
Engines & Propulsion
Yanmar 2GM20 (1998)
Yanmar SD20 saildrive.
Elice Radice folding propeller, new in 2018.
The fuel tank is nominally 40 litres.
Boatmatch Tip: Want more advice about buying this Rogers Whitbread 30? Checkout our Boatmatch Buyers Guide!
Navigation & Performance Systems
Comar CSB200 AIS transponder and VHF antenna splitter. This model has no display but interfaces with the PC charting software.
Garmin GPS128. Very old but solid and easy to use.
Accepts all the instrument, GPS and AIS data and transmits it over WiFi. Various apps for Android or Apple tablets will pick it up allowing you to navigate on deck.
ICM model IC-M232G. New 2016
Raymarine ST60, Tri data, 4 programmable graphic displays and an ST6000 autopilot control head.
Raymarine SPX-5 with a GP ram which fits onto the tiller. ST6000 control head.
Sterling power alternator regulator and zero-voltage-drop splitter diode. Automatic charging of the engine start battery first and excellent charging control. No changeover switch required.
Boatmatch Tip: Need advice about possibly insuring this Rogers Whitbread 30? Checkout our Boatmatch Insurance Guide!
Harken mainsheet traveller with windward sheeting car
Harken 32 ST selftailing halyard winches
Antal W30 jib sheet winches, new in 2017
Harken low-friction rings for the backstay tackle
Antal low-friction rings for the job sheets and spinnaker barber haulers
Interior and navigation lights are all LED
Full RORC Category 2 safety gear except for a handheld VHF, ‘means for severing the rigging’ (we take a battery powered angle grinder, which is not included) and lifejackets, as our crew bring their own.
Ocean Safety ISO9650 6 man liferaft in a canister. Serviced February 2018
JobBuoy MOB recovery sling (really a mini-liferaft) new October 2018
ACR Globalfix V4 406MHz Epirb (new 2016, servicing required in 2026)
Jackstays, first aid kit, foghorn, horseshoes, dan bouy etc. etc. etc.
300 Litre tanks each side, 75mm transfer pipe, electrically pumped.. Contact the seller of this Rogers Whitbread 30 for more details.
Rigging & Winches
Rigging & Winches equipped on this Rogers Whitbread 30 - Aluminium mast & boom by Selden, this was installed in 2011 and at the same time carbon chainplates were added on the gunwhale to match. The lower spreaders are full width.
Single line reefing for 2 reefs in the boom
Carbon deck mounted bowsprit, using Selden mounting rings. This has a single tackline running up the centre of the bowsprit and is a thick-walled tube and used without a bobstay to fly asymmetric spinnakers and the code 0.
Rod standing rigging apart from the wire forestay and a dyneema backstay.
Single Tack line
Single masthead spinnaker halyard
Fittings for a fractional spinnaker halyard, which is currently not installed,
2 jib Halyards, both 2:1.
The jib sheeting arrangement has recently been changed to a fully floating system using low-friction rings which is much simpler, lighter and cheaper and seems to be working well so far. The original tracks and Harken cars will be supplied with the boat.
Sails of the Rogers Whitbread 30 - Mains
‘For best’ 2014 North offshore carbon laminate main, with a carbon taffeta laminated on one side, and 2 reefs. We use this sail for the summer and for offshore races, it is in very good condition despite a few batterings (especially the 2016 Round Ireland) and still has an excellent shape. This is the one on the boat in the video from the 2017 Fastnet mentioned below.
‘Delivery’ and winter main. 2011 Vectran Sanders main within 3 reefs. Physically in very good condition but starting to get a bit full. Still wins races in our local winter series.
2016 20 sq metre Dimension Polyant carbon GPL furling headsail, set flying on a Profurl Nex 1.5 endless line furler. Made by Goacher Sails. This excellent sail is the one on the boat in the video from the 2017 Fastnet mentioned below.
There is also a Karver KF1 furler which was used on this sail, but it currently has a part of the housing broken off. If the part is available from Karver it would be easy to repair.
2017 20 sq metre Dimension Polyant carbon GPL with a ‘LiteSkin’ non-woven carbon fabric laminated on both sides. This one is hanked on to the forestay and is a beautiful sail, it’s bulletproof and pulls like a train, good for up to 25 knots true. Also made by Goacher sails.
This is the worst sail on the boat. An old hanked on sail converted to a furling sail with vertical battens. This also sets on the Profurl unit but because it was converted the top does not furl up very well.
Quite old, but not much used PBO heavy whether jib. In excellent condition and very flat. Brilliant sail for when it gets very windy. Pretty small and not much use below about 25 knots.
The Idea behind this setup is that every headsail change is either from a furling sail to a hanked one, or vice versa, which makes life a lot easier. The addition of a good No 3 would finish the job.
A hanked on jib top by Bruce Banks. Made in 2007 but very little used. We have found it very useful on deliveries but it spends a lot of time in my attic.
Storm Jib & Trysail
Only been out of their bags for the Fastnet gates.
85 sq metre asymmetric from Steve Goacher in 2019. Delivered 2 weeks before the Fastnet and the main source of our good result this year. Optimised for sailing deep.
95 sq metre masthead asymmetric, in reasonable condition. This is currently not on the certificate as we felt it was not worth the rating hit. Unused for a couple of years. (It’s blue). Sanders sails, 2011.
78 sq metre masthead asymmetric in reasonable condition. (It’s white). Sanders sails, 2011.
Flatter, heavier reaching and blustery day kite, another masthead asymmetric. A really, really nice sail. (It’s black). Sanders sails, 2011.
2011 Code 0 from Sanders. This flies from the end of the bowsprit on another Profurl Nex 1.5 and the masthead spinnaker halyard. This sail has not had a huge amount of use before we got the boat. It’s in pretty good condition.
A white asymmetric which is too small for the boat, in reasonable condition. It should really be on eBay, but I haven’t got round to it.
2011 Sanders Carbon No1. A large (130%?) carbon furling headsail, which was originally used on a furlex furler but now has a 9mm dyneema bolt rope so it can be used on the Profurl units. A heavy, bulletproof sail in pretty good condition. Could easiliy be converted back to use on a foil.
Age unknown, semi-reasonable condition. This is fully battened and has a very large roach, in the style of an IMOCA 60 before Fathead mains came in. It is very powerful, and great in light airs, but it kills the IRC rating. Might be good for deliveries.
2 Saloon berths with lee cloths and cushions
2 quarter berths with camping cushions
Galley with sink and a single burner gas cooker, with attached gas bottle. This is a gimble-mounted Jetboil.
Chart table with electronics and chart stowage
Heads in the forepeak.
Boatmatch Tip: Have a question about the accommodation of the Rogers Whitbread 30? Contact the seller via clicking on the registering interest button above.
Owner's Comments of the Rogers Whitbread 30
A sister ship to the famous Sticky Fingers (the original boat names for this boat were 'Middle Fingers' and 'Brightwork').
Continuously maintained each year, the boat was completely re-rigged in 2011 with a Selden Aluminum mast, boom , new kicker and rod rigging, moving from the old style rig with runners and check stays to a full width, swept back spreader rig, allowing a larger genoa to be used.
A fixed Carbon bowsprit was added in 2006, designed by Simon Rogers the original boat designer. The boat is currently rated under IRC with the bowsprit, but the carbon spinnaker pole and symmetrical spinnakers are available with the boat.
Also in 2011 the boat was refitted at Desty Marine whilst the rig was replaced. New topsides paint and new deckpaint and anti-slip, composite chainplates, along with some additional cabin storage and a few other details.
The genoa is on a Selden furler with a second (detachable) inner forestay for the No 4 and Storm sails.
It is rated as a Category A vessel which means it can be raced in Cat 1 offshore races. The equipment specification is currently up to Cat 2 (Fastnet) standards.
Shortly after the start of the 2018 St Malo Race we were on starboard and were rammed by a port-tack Class 40, right in the Hurst Narrows. The port pushpit was completely mangled, their spreaders were caught in our backstay, so I had to cut it, and the Jon Buoy was smashed off the back and inflated. Insurance has paid for:
Rig unstepped and inspected (no damage)
Complete new guardrails, all new stanchions and pulpit and new port pushpit
Entire port side and transom vinyl coating replaced
Assorted GRP damage repaired
Video of Fasnet start 2017
Rogers Whitbread 30 For Sale is lying in South Glamorgan, Wales, UK. At 9.53 metres (approx. 31.27 feet) this Rogers is a bargain at £22,950.
Similar Boats To This Rogers Whitbread 30 For Sale
Contest 48CS Boat For Sale
Beneteau First 40.7 Boat For Sale
Grand Soleil 46.3 Boat For Sale
Custom Faruk Orhan Motorsailer Ketch Boat For Sale
Evolution 22 Boat For Sale
Jeanneau Sun Fast 43 Boat For Sale
Hanse 400 Boat For Sale
Dufour 56 Exclusive Boat For Sale
Nordia 50 Ketch Boat For Sale
J Boats J/44 Boat For Sale